Sensor Evaluation Kits
Products_id | Products_image | Products_url | Image | Name | Description | Data Sheet | Video | Webstore |
---|---|---|---|---|---|---|---|---|
32 | AG001_KIT.gif | www.nve.com/Downloads/AG001-manual.pdf | AG001-01E: GMR Analog Sensor Evaluation Kit | The AG001-01E GMR Analog Sensor Evaluation Kit is designed for experimentation and development. The kit contains an assortment of 14 NVE analog sensors plus several printed circuit boards and various permanent magnets. It includes the high-sensitivity AAH002 sensor. The kit contains only RoHS compliant parts. | Buy Online | |||
350 | AG920.gif | www.nve.com/Downloads/AG920-07E.pdf | AG920-07E: GT Sensor Evaluation Kit | The kit includes one of each of NVE's analog and digital GT Sensors, two DD001-12E signal processing ICs, and several circuit boards for fixturing and testing the sensors. | Buy Online | |||
582 | ag930-07.gif | www.nve.com/Downloads/ag93x-07.pdf | AG930-07E: AAT001 1.25 MOhm Angle Sensor Evaluation Kit | The kit includes a circuit board with an AAT001-10E 1.25 megohm Angle Sensor and a unity-gain buffer amplifier. The circuit board can be powered with a 1.7 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture. | Buy Online | |||
621 | ag930-07.gif | www.nve.com/Downloads/ag93x-07.pdf | AG933-07E: AAT009 6 MOhm Angle Sensor Evaluation Kit | The kit includes a circuit board with an AAT009-10E 6 megohm Angle Sensor and a unity-gain buffer amplifier. The circuit board can be powered with a 1.7 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture. The AAT009-10E Angle Sensor has ultra-ultra low power consumption and is ideal for long-term battery-powered operation or operation from harvested power. | Buy Online | |||
639 | AG921.png | www.nve.com/Downloads/AG921-07E.pdf | AG921-07E: AKL001 Gear-Tooth Sensor Demonstrator | A self-contained demonstrator for NVE’s unique AKL digital gear tooth sensor. The battery-powered demonstrator (battery included) is based on an AKL001 sensor. The demonstrator also includes a circuit board with an LED and driver, a biasing magnet, and a gear that can be turned by hand. No assembly required. Dimensions 3" x 3" x 1.5". | Buy Online | |||
645 | ag932-07.gif | www.nve.com/Downloads/ag932-07.pdf | AG932-07E: ADT002 Rotation Sensor Evaluation Kit | The kit includes a circuit board with an ADT002 low hysteresis, ultralow-power rotation sensor, a split-pole magnet that can be turned, and simple circuitry to drive LEDs from the sensor outputs. Two LEDs follow the sensor outputs; four others indicate the rotational quadrant. A 3-volt coin cell (included) powers the board. | Buy Online | |||
648 | ag930-07.gif | www.nve.com/Downloads/ag93x-07.pdf | AG931-07E: AAT003 40 KOhm Angle Sensor Evaluation Kit | The kit includes a circuit board with an AAT003-10E 40 kilohm Angle Sensor and a unity-gain buffer amplifier. The circuit board can be powered with a 1.7 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture. The AAT003-10E Angle Sensor's 20 kilohm output impedance is ideal for direct interface to microcontrollers. | Buy Online | |||
650 | AG940-thumbnail.gif | www.nve.com/Downloads/ag940-07.pdf | AG940-07E: Digital/Analog/Omnipolar/Bipolar Sensor Demo Board | The kit includes a demo board with our most popular sensor types: digital, analog, omnipolar, and bipolar. Each sensor drives an indicator LED. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. The evaluation boards are 3.75 x 5 inches (95 x 127 mm), and are powered by two coin cells (included). | Buy Online | |||
652 | AG941_ADL_Evaluation_Kit_Board.gif | www.nve.com/Downloads/ag941-07.pdf | AG941-07E: ADL-Series Sensor Demo Board | The kit includes a demo board with three ultraminiature, ultralow-power ADL-Series magnetic sensors. Each sensor drives an indicator LED, and a meter shows the sensor power in microamps or nanoamps. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. The evaluation boards are 3.75 x 5 inches (95 x 127 mm), and are powered by a coin cell (included). | Buy Online | |||
653 | ag040b-image.gif | www.nve.com/Downloads/ag040b.pdf | AG040B: ADL021 Battery-Powered Nanopower Sensor Demonstration Board | This kit includes a demo board with the ultraminiature, ultralow-power ADL021 magnetic switch. An LED shows the sensor output. The board is powered by a three-volt lithium coin cell (included), and the sensor quiescent power consumption is so low that the battery will last indefinitely. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. Sensor quiescent current is only 100 nA typical; the sensor operate point is 20 Oe; and the sensors are 1.1 mm x 1.1 mm. These miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm). | Buy Online | |||
654 | ag040c-image.gif | www.nve.com/Downloads/ag040c.pdf | AG040C: ADL021 Externally-Powered Nanopower Sensor Evaluation Board | This kit includes an evaluation board with the ultraminiature, ultralow-power ADL021 magnetic switch. The board has a digital output, and can be powered from a 3.3-volt nominal supply. An LED shows the output. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. Typical sensor quiescent current is only 100 nA, the sensor operate point is 20 Oe, and the sensors are 1.1 mm x 1.1 mm. These miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm). | Buy Online | |||
667 | AG934_PCA.gif | www.nve.com/Downloads/ag934-07.pdf | AG934-07E: AAT101 Full-Bridge Angle Sensor Evaluation Kit | The kit includes a circuit board with an AAT101-10E Full-Bridge Angle Sensor, which provides two differential analog outputs, 90 degrees out of phase. The circuit board can be powered with a 0 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture. The AAT101-10E Angle Sensor typical output amplitude is 400 mV/V peak-to-peak for each output. | Buy Online | |||
669 | AG910_KIT.gif | www.nve.com/Downloads/AG910-07_manual.pdf | AG910-07E: GMR Switch Evaluation Kit w/ZIF socket | AG910-07 kit includes several MSOP GMR Switches with different magnetic operate points and different output options such as current sink and current source. Magnets, circuit boards for mounting the parts, and a zero insertion force (ZIF) socket are also included. | Buy Online | |||
670 | AG911_KIT.gif | www.nve.com/Downloads/AG911-07_manual.pdf | AG911-07E: GMR Switch Evaluation Kit | AG911-07 kit includes several MSOP GMR Switches with different magnetic operate points and different output options such as current sink and current source. A magnet and circuit boards for mounting the parts are included. | Buy Online | |||
677 | AG935_board-large.gif | www.nve.com/Downloads/ag935-07.pdf | AG935-07E: 60-LED “Blinky” AAT003 Angle Sensor Demo Board | This kit includes a 5-inch by 5-inch circuit board with an AAT003 Angle Sensor, 60 multicolor smart LEDs (6° spacing) to indicate rotation angle, and a preprogrammed, onboard ATtiny microcontroller. The microcontroller also provides a PWM angle output. The board is factory calibrated and can optionally be field calibration. A split-pole magnet, a magnet locating fixture, and a 5-volt wall mount power supply module are also included. The board comes preprogrammed, but the Arduino compatible software is available on Github/NveCorporation so you can use the routines in your own application. | Buy Online | |||
688 | AG951-layout.gif | www.nve.com/Downloads/ag951-07.pdf | AG951-07E: SM324-10E Smart TMR Magnetometer Evaluation Kit | The AG951-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the remarkable SM324-10E Smart TMR Magnetometer. The kit includes: An evaluation board with: - an SM324-10E sensor. - a microcontroller connected to the sensor via I²C. - a current-carrying trace under the sensor for evaluating as a current sensor. A powerful, intuitive graphical user interface. Simple software installation. Flexibility to power from USB or an external power supply. Isolated USB interface for safety and noise minimization. USB cable to connect the Evaluation Board to a computer. A small ceramic magnet for evaluating as a proximity sensor. | Buy Online | |||
690 | AG903B2.png | www.nve.com/Downloads/AG903B-01.pdf | AG903B-07E: 0.75A/5A/50A GMR Current Sensor Evaluation Kit | The evaluation board includes three sensor over current-trace modules with three AAL024-10E TDFN current sensors. The board measures 1.565" x 2.915" (40 mm by 74 mm), and includes three separable modules. The three modules are optimized to measure currents of 0-0.75A, 0-5A, and 0-50A. | Buy Online | |||
691 | AG952-07.png | www.nve.com/Downloads/ag952-07.pdf | AG952-07E: SM124-10E Smart GMR Magnetometer Evaluation Kit | The AG952-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the easy-to-use SM124-10E Smart Magnetometer. The kit includes: A 1" x 1.6" (25 mm x 41 mm) evaluation board with: - an SM124-10E sensor. - a microcontroller connected to the sensor via I²C. - a current-carrying trace under the sensor for evaluating as a current sensor. A simple, intuitive graphical user interface. Simple software installation. USB cable to connect the Evaluation Board to a computer. A small ceramic magnet for evaluating as a proximity sensor. | Buy Online | |||
693 | AG955-07.png | www.nve.com/Downloads/ag955-07.pdf | AG955-07E: Self-Contained SM12x Programmer | This self-contained module allows zeroing and programming the digital output threshold and hysteresis or SM124-10E or SM125-10E Smart Magnetometer without need of a computer or a customer microcontroller. The 2.5" x 2.5" (64 mm x 64 mm) board has an I²C master microcontroller connected to the SM124. A pushbutton for zeros the sensor, and miniature rotary thumbwheel switches provide three digits of resolution for the threshold and two for hysteresis. A custom TDFN-6 socket accommodates the 2.5 mm x 2.5 mm SM12x-10E. The module is powered by a small wall-mounted power supply (included). Jumpers allow the sensor to be disconnected from the rest of the board so the board can be used as an interface to the customer’s electronics. This module includes: A 2.5 x 2.5 mm TDFN6 socket for a SM12x-10E Smart Magnetometer A preprogrammed, onboard microcontroller Two sets of thumbwheel switches for digital threshold and hysteresis Two LEDs indicating the sensor’s output and successful programming A 5-volt wall-mount power supply Sensors are sold separately. | Buy Online | |||
694 | AG956--200x160.png | www.nve.com/Downloads/ag956-07.pdf | AG956-07E: ASR002-10E Smart Angle Sensor Evaluation Kit | The AG956-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the remarkable ASR002-10E Smart Angle Sensor. The kit includes: An evaluation board with: - an ASR002-10E sensor - a diametrical ceramic magnet - fixturing and a magnet holder. An interface board with: - a microcontroller connected to the sensor via SPI - flexibility to power from USB or external power supply - isolated USB interface for safety and low noise. A powerful, intuitive graphical user interface. Simple software installation. USB cable to connect the Evaluation Board to a computer. | Buy Online | |||
698 | AG953--200x160.png | www.nve.com/Downloads/ag953-07.pdf | AG953-07E: SM225-10E Smart TMR Magnetometer Evaluation Kit | The AG953-07 Evaluation Kit has everything you need to test and evaluate the easy-to-use SM225-10E Smart Magnetometer. The kit includes: A 1" x 1.6" (25 mm x 41 mm) evaluation board with: - an SM225-10E sensor. - a microcontroller connected to the sensor via SPI. - a current-carrying trace under the sensor for evaluating as a current sensor. A PWM board output for an analog representation of the measured magnetic field. A simple, intuitive graphical user interface. Simple software installation. USB cable to connect the Evaluation Board to a computer. A small ceramic magnet for evaluating as a proximity sensor. | Buy Online | |||
702 | AG954-w-header.png | www.nve.com/AG954.pdf | AG954-07E: TDFN6 Socket Board | The AG954-07E provides a socket for easy programming and prototyping of TDFN6 devices without soldering and unsoldering. The custom socket is compatible with NVE's 2.5 mm x 2.5 mm TDFN6 package parts (-10E suffixes). The board is 1.5" x 2" (38 mm x 50 mm), and uses brass hardware to minimize magnetic interference with the socketed sensor. A 0.1"-spaced header provides for connections to the sensors, and a row of 0.1"-spaced through-holes allows for auxiliary parts such as a decoupling capacitor or an LED. | Buy Online | |||
721 | AG905.png | www.nve.com/Downloads/SB-00-105_AG905_ALT025-High-Current-Manual.pdf | AG905-07E: ALT025 High Current PCB Demonstration | This demonstration features the ALT025 low hysteresis, high-speed TMR magnetometer and a high current PCB layout, optimized for the detection of +/- 200 amps. The board has sturdy screw terminal connections for current input, and it has header pins for sensor power and output. | Buy Online | |||
722 | AG953H.png | www.nve.com/Downloads/SB-00-104_AG953-07H_SM225-High-Current-Manual-RevA.pdf | AG953-07H: SM225-10E Smart TMR Magnetometer High Current Demonstration | The AG953-07H demonstrates high current measurement with the SM225-10E Smart TMR Magnetometer. A 1/4" x 1/2" busbar is mounted to the PCB, and the sensor can detect up to +/- 650 amps. Based on the AG953-07E Evaluation Kit, a powerful, intuitive graphical user interface allows the user to control sensor offset, calibration, filtering, and memory. | Buy Online | |||
731 | ag040b-image.gif | www.nve.com/Downloads/ag040t.pdf | AG040T: ADT923 3V Battery-Powered TMR Switch Demonstration Board | The AG040T Demonstration Board has an ADT923 TMR magnetic switch powered by a three-volt lithium coin cell (included). An LED to show the sensor output. The sensor’s low quiescent power allows the battery to last at least several years with occasional LED use. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. The sensors are 1.1 mm x 1.1 mm x 0.35 mm, and these miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm). | Buy Online | |||
737 | AG952-07.png | www.nve.com/Downloads/ag952-07.pdf | AG962-07E: SM125-10E Smart GMR Magnetometer Evaluation Kit | The AG962-07E Evaluation Kit has everything you need to calibrate, test, and evaluate the easy-to-use SM125-10E Smart Magnetometer. The kit includes: A 1" x 1.6" (25 mm x 41 mm) evaluation board with: - an SM125-10E sensor. - a microcontroller connected to the sensor via I²C. - a current-carrying trace under the sensor for evaluating as a current sensor. A simple, intuitive graphical user interface. Simple software installation. USB cable to connect the Evaluation Board to a computer. A small ceramic magnet for evaluating as a proximity sensor. | Buy Online | |||
750 | AG956--200x160.png | www.nve.com/Downloads/ag956-07.pdf | AG963-07E: ASR012-10E I²C Smart Angle Sensor Evaluation Kit | The AG963-07E Evaluation Kit has everything you need to calibrate, test, and evaluate the remarkable ASR012-10E I²C Smart Angle Sensor. The kit includes: An evaluation board with: - an ASR012-10E sensor - a diametrical ceramic magnet - fixturing and a magnet holder. An interface board with: - a microcontroller connected to the sensor via I2C - flexibility to power from USB or external power supply - isolated USB interface for safety and low noise. A powerful, intuitive graphical user interface. Simple software installation. USB cable to connect the Evaluation Board to a computer. | Buy Online | |||
804 | AG973.png | www.nve.com/Downloads/ag973-07.pdf | AG973-07E: SM223-10E Smart I²C TMR Magnetometer Evaluation Kit | The AG973-07 Evaluation Kit has everything you need to test and evaluate the easy-to-use SM223-10E I2C Smart Magnetometer. The kit includes: • A 1" x 1.6" (25 mm x 41 mm) evaluation board with: - an SM228-10E sensor. - a microcontroller connected to the sensor via I2C. - a current-carrying trace under the sensor for evaluating as a current sensor. • An LED indicating the state of the threshold output. • A PWM board output for an analog representation of the measured magnetic field. • A simple, intuitive graphical user interface. • Simple software installation. • USB cable to connect the Evaluation Board to a computer. • A small ceramic magnet for evaluating as a proximity sensor. | Buy Online |